Please use comma to split. For example: cen,rc cars or O.S.,p3,glow plug
   Features
  • .28 ENGINE WITH POLISHED PIPE.
  • 2.4 Ghz RADIO SYSTEM WITH METAL GEAR SERVOS.
  • FRONT STEEL CVA DRIVE SHAFTS.
  • FRONT KING PIN HUB TYPE SUSPENSION.
  • ALUMINIUM HARD COATED CHASSIS WITH FRONT AND REAR KICK-UP.
  • NYLON REAR SKID PLATE.
  • 16MM V2 HARD COATED THREADED SHOCKS.
  • SOFT 16MM PRO SHOCK SPRINGS.
  • FRONT AND REAR 7075-T6 4MM ALUMINIUM SHOCK TOWERS.
  • ONE PIECE SERVO, RECEIVER AND BATTERY TRAY.
  • FULL RUBBER SEALED STEEL BALL BEARINGS.
  • DUAL FIBER DISK BRAKES.
  • SIDE LOAD BRAKE CALIPERS FOR BETTER CENTER OF GRAVITY.
  • LONG SUSPENSION FRONT AND REAR ARMS WITH DROOP SCREWS.
  • 3 SHOE CLUTCH.
  • 125CC FUEL TANK WITH OPEN CAPACITY PLUG.
  • INTEGRATED FUEL TANK CLIPS FOR EASY MOUNTING OF FUEL LINES.
  • FULLY ADJUSTABLE TURNBUCKLES FOR STEERING AND CAMBER.
  • 3 OIL FILLED DIFFERENTIALS, FRONT , REAR AND CENTER.
  • FORGED STEEL DIFFERENTIAL BEVEL AND PINION GEARS.
  • FRONT AND REAR 2.3MM SWAY BARS.
  • DUAL STAGE FORWARD FACING AIR FILTER.
  • SLIDER ENGINE MOUNTS.
  • REAR MUD GUARD AND NARROW CHASSIS GUARDS.
  • RED ALUMINIUM HIGH-LIGHTS FOR THE CUSTOM LOOK.
  • ALUMINIUM HINGE PIN HOLDER WITH INSERTS.
  • HI-DOWN FORCE WING.
  • LIGHT-WEIGHT INCH-UP WHEELS WITH SOFT RUBIX TIRES.
  • OVERALL LIGHT-WEIGHT BUGGY WEIGHING IN JUST 3300g.
  • PRE-CUT PRINTED LEXAN BODY.
   Specifications
  • Length: 515m
  • Front Width: 307mm
  • Rear Width: 303mm
  • Height: 188mm
  • Wheelbase: 325-330mm
  • Front Toe-In: Adjustable
  • Rear Toe-In: 1~3 degree Changeable
  • Weight :3300g Below (Included Radio and Engine)
   Tag/Keyword
  • HongNor,1:8,Buggy,1:8 2.4G 28 Pull Start Engine,Nitro
   Features
  • .28 ENGINE WITH POLISHED PIPE.
  • 2.4 Ghz RADIO SYSTEM WITH METAL GEAR SERVOS.
  • FRONT STEEL CVA DRIVE SHAFTS.
  • FRONT KING PIN HUB TYPE SUSPENSION.
  • ALUMINIUM HARD COATED CHASSIS WITH FRONT AND REAR KICK-UP.
  • NYLON REAR SKID PLATE.
  • 16MM V2 HARD COATED THREADED SHOCKS.
  • SOFT 16MM PRO SHOCK SPRINGS.
  • FRONT AND REAR 7075-T6 4MM ALUMINIUM SHOCK TOWERS.
  • ONE PIECE SERVO, RECEIVER AND BATTERY TRAY.
  • FULL RUBBER SEALED STEEL BALL BEARINGS.
  • DUAL FIBER DISK BRAKES.
  • SIDE LOAD BRAKE CALIPERS FOR BETTER CENTER OF GRAVITY.
  • LONG SUSPENSION FRONT AND REAR ARMS WITH DROOP SCREWS.
  • 3 SHOE CLUTCH.
  • 125CC FUEL TANK WITH OPEN CAPACITY PLUG.
  • INTEGRATED FUEL TANK CLIPS FOR EASY MOUNTING OF FUEL LINES.
  • FULLY ADJUSTABLE TURNBUCKLES FOR STEERING AND CAMBER.
  • 3 OIL FILLED DIFFERENTIALS, FRONT , REAR AND CENTER.
  • FORGED STEEL DIFFERENTIAL BEVEL AND PINION GEARS.
  • FRONT AND REAR 2.3MM SWAY BARS.
  • DUAL STAGE FORWARD FACING AIR FILTER.
  • SLIDER ENGINE MOUNTS.
  • REAR MUD GUARD AND NARROW CHASSIS GUARDS.
  • RED ALUMINIUM HIGH-LIGHTS FOR THE CUSTOM LOOK.
  • ALUMINIUM HINGE PIN HOLDER WITH INSERTS.
  • HI-DOWN FORCE WING.
  • LIGHT-WEIGHT INCH-UP WHEELS WITH SOFT RUBIX TIRES.
  • OVERALL LIGHT-WEIGHT BUGGY WEIGHING IN JUST 3300g.
  • PRE-CUT PRINTED LEXAN BODY.
   Specifications
  • Length: 515m
  • Front Width: 307mm
  • Rear Width: 303mm
  • Height: 188mm
  • Wheelbase: 325-330mm
  • Front Toe-In: Adjustable
  • Rear Toe-In: 1~3 degree Changeable
  • Weight :3300g Below (Included Radio and Engine)
   Tag/Keyword
  • HongNor,1:8,Buggy,1:8 2.4G 28 Pull Start Engine,Nitro

Write a review

Note: HTML is not translated!
    Bad           Good

HongNor 1/8 Buggy X3 Sabre Nitro RTR

  • Brand: HongNor
  • Product Code: X3 Sabre-RTR
  • Availability: In Stock
  • $445.00


Tags: X3 Sabre-RTR